Jump to content

skynoch

Members
  • Posts

    404
  • Joined

  • Last visited

Posts posted by skynoch

  1. All my pup tanks are filled right now so when Mom (in the foreground) gave birth this time I was on holidays in Mexico and all the pups made a break into the main tank from a floating tank I had. I did lose two over the time I was there since I took my feedings down from when I was away but now that I'm home I upped the feedings and have kept them in there with no problems since. The little guys are feeding on the mess left from the bigger fish feeding and seem to be doing well.

    The little guy in the middle is about a 7-8" pup.


    IMG_1147.jpg

  2. When dripping with chloramine you would either use a filter rated for chloramine so I would use a sediment,carbon and then a chloramine for the 3rd stage or you could use a dosing system with prime. I've got some links for flowmeters and dosing systems that I have if you need it. If your really handy you could ditch your hot water tank and install a tankless hot water system. Depending on location of everything it would run you around 1500 to 2200 to do it yourself. Drip may be easier lol.

  3. Small rays I use a rubbermaid container like Kyle large rays I use a rubber fishing net. I've done both with pups, kept them in a floating bin and moved them into a new tank depending on tank space available. Do either right after birth.

  4. Hey Kyle good to see you back, hope your gonna get yourself back into rays soon. I used two coats of Zavlar on mine but then used a trowel coat with it to place my tiles on after. I tried Zavlar to glue the acrylic window on but woould use silicone next time I think. Silicone won't stick to the zavlar as well as it will the epoxy paints. Zavlar can also be tricky to work with especially if you are building a big tank you are going to walk around in as it stays tacky forever or until water is applied or you expose it to UV light. The good thing about it is it is really flexible and self healing. I would like to try a smaller tank with epoxy to see which one I like more to work with.

  5. What type of fish do you want to keep. Saltwater will require a different build than some freshwater builds when it comes to the waterproofing. I have built a 2200 gallon plywood tank and can give you alot of pointers along the way. If you like monster freshwater fish like arrows or stingrays than I would reccomend a 8 x 5 x 40 inch tank. If you are looking at smaller fish then do not go as deep. As far as filtration goes I would go with a ultima filter or a sand filter with a bio tower, if your budget can go bigger I can help there too. For a 8 foot by 40 inch high piece of acrylic you would need it 1.25 inches thick and that cost me around $1700 and it is crystal clear.

  6. My two laticep rays have outgrown there home and are moving into the 180 all by them selves. Whats the best way to move them? I emptied the 180 of fish totally last night. water is still there and i just have the lone fx5 on there now. The tank they are coming from is heavily over filtered. ac110 eheim 2217 and fluval 405. I am planning on moving all these filters to the 180 for the move. I am planning on removing the fx5 for some maintenance and sponge replacement. Then i will add it to the other 3 untill it catches up with fresh bacteria. should I just add 50 gallons of fresh water to the 180? Than add the 55 gallons of water they are in with thte rays and run the 180 about half full? slowly adding water with wcs everyday? any advice would be great, would like to keep these rays healthy and they are long overdue for the move. Plus I am tired of removing 7.5 gallons of water a day from the rays.

    If you have kept your water quality up then any new water you add will only benefit the rays. I would put your existing water from your 180 into a clean garbage can as big as you can and fill with as much new water as possible to keep your temp the same as your current 55 gallon tank. I would then put in half your 55 gallon into the 180 gallon and then slowly refill the 55 to acclimate your rays in case of any ph changes ect... Once the 55 is refilled you can take half the water back out and put it in the 180 and then move the rays and the rest of the water in the 180. If you need to top it off use the water in the garbage can. I would then leave the lights off and cover the tank for half a day to a day checking on them occasionally and testing water occasionally.

    During this whole process you shouldn't need to shut off your filters (keep them in the 55) if the intakes are low enough (if they are over halfway up drop them down). If you use the old filters and move the rays this way you shouldn't have to worry about your tank recycling.

    you need to pm skynoch...... He is the ray master with rays and our water bro.....

    I always figured new water is better than old water as the bio lives in the media. As long as its the same temp and PH dump the tank into the new one top it off with fresh (de chlorinated) and move the filters. Then keep an eye on the ammonia spikes IF you get any with more water changes the first few weeks.

    Also keep em in a rubbermaid while you do all this and take your time mixing the new water in there before you add em. Thats how Ive done it with motoros moving tanks and I havent had a problem.

    Your for sure right about the new water being better in fact you should be able to use 100% new pretreated water if your temp and ph are the same. The big problem is most people don't keep up on thier tank maintenance so big water changes tend to raise the ph back up to the tap level around here.

    Yeah i already pmd scott on this matter. just waiting for him to get back online! haha thanks hustler

    So are you talking about the actual move your about the water quality etc?

    If you are talking about the move I have 8 rays and am by no means an expert but what works for me is using a laundry basket. When I moved my 20" female motoro to my 400 gallon I used a laundry basket and worked really well. What I did was had a BIG rubbermaid container (which was big enough for the laundry basket to fit in) with about 8" inches of water in it. Then I took the laundry tub and put it into the aquarium on it's side. Then I gently guided her unto the side of the laundry basket and then tip it right side up and lifted her out. Then I just placed the laundry basket in the rubbermaid and off I went. Then I slowly added water into the rubbermaid to make sure she was acclimated to the chemistry of the new tank. Once that was done I just lifted the laundry basket out and then placed it into the aquarium and tipped it on it's side so she could swim out. I have done this now quite a few times when moving my other motoros and when moving my retics but I used smaller launder basket with the retics.

    Scott is the real expert but I thought I would put my two cents in :)

    I've used the laundry baskets, rubbermaid bins and rubber nets which all work good depending on what the circumstance is but I've found with big rays the rubbernets are the easiest for tanks, for ponds the baskets work well.

    Thanks for your help! I'm planning the move tonight. I'm just worried about my laticep female. She is growing slower and is more sensitive than the male. I don't want to stress her anymore. I may leave her for a week or so and see how the male does. Its the male that has far outgrown the tank anyway.

    Is your female the one that was having some problems? She should be outgrowing your male soon. Hopefully the bigger tank will relax her a little more.

  7. Man they must be getting bigger, you are right the tank doesn't look as big anymore.

    Looks great Trevor

    Time for another bigger tank. I haven't decided on the dimensions but I think I will go 10' x 4' x 30" and then I am going to sell my 230 and 180 and just have the two big tanks in the basement plus my 150 and 90 in a spare bedroom. I already got the okay from my BOSS! LOL

    10' x 4' would be a great size for everything. You got a great boss

×
×
  • Create New...