Jager heaters

[severum_03]

Hello how does one set the temperature on Jager heaters?I don t have instructions and aparently there is a way to set these heaters up.If anyone knows please fill me in I would sure appreciate it.Thanks

[punman]

Just set the dial to the temp. you want and check it in a bit with a reliable thermometer. If you want say 80 degrees, set it , for 80 degrees. If the thermometer says it is really 81, just turn it down a degree.

[RD.]

1. Set your heater close to an accurate thermometer

2. Pull the blue knob up

3. Turn the dial so the temperature matches the same a the thermometer

4. Push the blue knob back in (your heater is now calibratated)

5. Turn the dial to your desired temperature

[SandyD]

Thanks very much my heater is officially no good thanks again.

[Willfishguy]

Hello how does one set the temperature on Jager heaters?I don t have instructions and aparently there is a way to set these heaters up.If anyone knows please fill me in I would sure appreciate it.Thanks

With the Jager unpluged, cooled down and out of the water, pop up the small blue round tab with a coin or a dull knife. Then turn the temperature dial to the existing temperature of the aquarium water (not the temperature you want the water to be). Push the small round blue tab back down, reinstall the Jager, plug in and away you go. Or do you have an older Jager?

Thanks very much my heater is officially no good thanks again.

What is it doing or not doing?

Edited November 3, 2006 by Willfishguy