trixie

Not mine but in a lot of posts

Why is location not in a members profile

go to http://www.austinglass.com.au/The%20secret.htm

call hagen there are in edmonton

Go to Canadian Tire and get a cloth buffing pad ,then look for a wax stick of diferent grades of grit.If you cant find any PM me i have all the grades .

If your furnace dose not have a outside air to the cold air return you should install one .One for your safety and fresh air in the house all new furnace have two.

Your 8 ft 2x2 on top will hold very little it will just bend.There is not much pressure at the top most is just up from the bottom about 6 in .

Try to get or make distilled water it should have o PH of 7

Not if you beleve the paper friday

That what Edmonton started using in the water [ bleach ].Will Prime remove it.

3/16= 4.8 mil my 33 gal is 36x16 ln is 5 mil if you put two braises in the top and cut off the bevel . You should end up with 30x16 in it is not needed to cut the top edge.

There is very little pressure when it is running but when the power is turned off there is about 2LB. Take the oring off and clean ,dry it lub with water only. new 5.oo$

You might want to call before going to Aquagiant in the west as they are closing that store

http://twovoyagers.com/metamorphosis/faq/faqii.html