trixie Posted January 19, 2008 Report Share Posted January 19, 2008 We have considered it. Trust me! However, to update you, we tried out that cool 2x4 trick and managed to get the top off the tank. Rod actually used a 4x4 and said it worked awesome. Now we have some of that silicone be gone stuff on there and we are going to try to break it apart this weekend.Thanks again for all the great ideas! Make a v cut in all the coners just to make a break in the silicone so only the silicone between the glass is holding. Put a little pressure on the glass at the top and try to get a razor in just a little bit and run it down.This helps to break the seal Quote Link to comment Share on other sites More sharing options...
RD. Posted January 29, 2008 Report Share Posted January 29, 2008 Just a side note to this discussion, it now appears that PetSmart is no longer pushing Perfecto tanks, and the majority of their tanks are now made by Hagen. Perhaps they grew tired of dealing with Perfecto failures? Quote Link to comment Share on other sites More sharing options...
Parachromis1 Posted January 29, 2008 Report Share Posted January 29, 2008 No, part of the deal when Petsmart bought SuperPet was that they were supposed to carry 25% of their products from Hagen. and they are a better built tank, so i dont see a problem. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.