devocole Posted January 2, 2016 Report Share Posted January 2, 2016 (edited) Hi, its been a while since I've done a large fresh water aquarium. I've spent a few years on Terrariums and Salt. This tank is 180 gallons 2 Fluval 36 inch two bulb T5 2 Fluval FX6, 1 Ross mount M2600 2 200 watt, Ehiem heaters 4 Bags ADA Amazonia 2 Bags Carib sea light colored sand Rock collected from a mountain top several years ago in Banff Malaysian wood. Whisper 10 air pump This tank is going to be low tech. Java fern, Anubias, Marsilea, moss, a few stem plants and possibly Cabomba. I enjoy the hardscape so much that I will start planting sparsely. Future Fauna: 10-20 Congo tetras as the display fish 25-100 amano shrimp 10-30 otocinclus 5 bamboo shrimp 10-20 dwarf chain loaches The Outtakes and Power head are on the right side of the tank moving water to the left. Currently the tank is filled. The FX6's have activated carbon and purigen for the first month. Lights are off for the month and currently the NH3 is at 3.7ppm. At 2 weeks I will check the NH3 again and do a 50% water change. At 4 weeks I will check: NH3, NO3 and NO2 do a water change. And consider turning the lights on and adding some plants. Edited January 2, 2016 by devocole Quote Link to comment Share on other sites More sharing options...
SKAshrimps Posted January 2, 2016 Report Share Posted January 2, 2016 great looking start so far! Quote Link to comment Share on other sites More sharing options...
ckmullin Posted January 2, 2016 Report Share Posted January 2, 2016 Looks nice as well. Thin substrate layer tho imo for plants. Quote Link to comment Share on other sites More sharing options...
devocole Posted January 5, 2016 Author Report Share Posted January 5, 2016 Thank you. I'm starting to look into ways to reduce water changes using reactors etc. We'll see. The ADA is 4 inches at its thickest. Quote Link to comment Share on other sites More sharing options...
ckmullin Posted January 5, 2016 Report Share Posted January 5, 2016 4" is good then...it's misleading by the picture. On your specs the light for a 180 I'd say is lite...in a few weeks (just might) need to be increased. For the rocks collected in nature I always recommend the 'ol acid test. Quote Link to comment Share on other sites More sharing options...
scummy Posted January 8, 2016 Report Share Posted January 8, 2016 looks good. any updates? Quote Link to comment Share on other sites More sharing options...
devocole Posted January 8, 2016 Author Report Share Posted January 8, 2016 Did my first 50% water change today. Ammonia was at 6 (ppm i believe) so quite high. The ADA releases it well. Nothing interesting will be going on in there for another month or so. I have been toying with the idea of a purigen reactor, and other types of reactors. I'm starting to think that they will mostly be just an expense that isn't necessary for what I'm doing. Quote Link to comment Share on other sites More sharing options...
ckmullin Posted January 9, 2016 Report Share Posted January 9, 2016 (edited) Purigen does wonders however I don't think it is needed in this type of setup, most people don't need that. Edited January 9, 2016 by ckmullin Quote Link to comment Share on other sites More sharing options...
Kayen Posted January 12, 2016 Report Share Posted January 12, 2016 Welcome back Devon, good to see you back into the hobby! Good start so far! Quote Link to comment Share on other sites More sharing options...
devocole Posted January 17, 2016 Author Report Share Posted January 17, 2016 Tank Journal Set up started Dec 30/2015 Dec 30/2015 ADA, Sand, Wood added All hardware added and running Water added with prime, and cycle bacteria Both FX6’s have activated carbon, one with 200ml of purigen, excess bio media Temp at 78 degrees Flow is low from the filters with so much media likely need another powerhead Will clean filters at 2 weeks with water change Leave lights off at this stage Jan 1/2016 Ammonia 3.7 Added 2600GPH powerhead Added whisper 10 air pump under FX6 outputs Jan 5/2016 Ammonia 6 Jan 8/2016 Did 50% water change with Prime Jan 12/2016 Ammonia 3 Added recommended amount of Seachem Stability Jan 13/2016 Ammonia 3 Added 2 cups of Smart Start Complete Jan 14/2016 Did 50% water change with Prime Added 1 cup of Smart Start Complete Added 4 caps of Seachem Stability Ammonia 1.2 right after Jan 15/2016 Added 1 cup Smart Start Complete Added a pour of Seachem Stability Added 20 water lettuce,3 java fern, 7 small crypts Ammonia 1.2 Jan 16/2016 Added 1 cup of Smart start Complete Added a small pour of Seachem Stability Added a Tropica cup of Marsalia cut up in 50 or more pieces. First full day of timed light on the tank. From 3 to 11. Jan 17/2016 Ammonia 0.6 Quote Link to comment Share on other sites More sharing options...
Ghostface Posted January 27, 2016 Report Share Posted January 27, 2016 Looks great, well done. Quote Link to comment Share on other sites More sharing options...
devocole Posted January 29, 2016 Author Report Share Posted January 29, 2016 Jan 19/2016 Ammonia 0.1 Nitrite 3.3 off the chart Nitrate 110 off the chart Performed test on cycled tank to check accuracy. Nitrite 0 Poured remaining Stability, probably 10 caps Put 12 drops house cleaner ammonia. Thinking about it, probably not necessary as the ADA is leaching ammonia like crazy and that is why the Nitrite and Nitrate is so high. Jan 20/2016 Did 75% water change 3 caps of Prime in Tub Planted another cup of Marselia. Levels after water change: Nitrite 0.3 Nitrate 50-110 mg/l Only leaving FX5s on. Jan 22/2016 Nitrite 33 off the chart Added 4oz Smart Start Jan 24/2016 Did 40% water change with 2 caps of Prime in Tub Planted: Tropica cup Hygrophila araguaia. Anubias cup Cryptocoryne parva. Added 1oz Excel Added 4 caps Smart Start Nitrite 0.3 Nitrate 20 Jan 26/2016 Morning Nitrate 5 lowest on scale Nitrite 0.1 lowest on scale Phosphate 0 Evening Poured the remaining smart start Drip acclimatized 8 congo tetras 1 hour Drip acclimatized 5 amano shrimp 1 hour Accepted very little spectrum fish pellets Spit out spirulina flake A few fed on frozen daphnia They spent the majority of the time in the bottom left front corner Jan 28/16 Ammonia 0.1 Nitrite 0.1 Fish eat fruit flies, daphnia, mysis if not too large Does not eat Spectrum in micro or small pellets Saw an Amano shrimp dead. Quote Link to comment Share on other sites More sharing options...
Lorelei Posted February 4, 2016 Report Share Posted February 4, 2016 Your tank looks awesome! Quote Link to comment Share on other sites More sharing options...
devocole Posted March 7, 2016 Author Report Share Posted March 7, 2016 Feb 8/16 Was away for a week and fish were fed spectrum 3 times Diatom algae on the glass and sand in the high light areas. Nitrate 5 Phosphate 0 40% water change 1.5 caps of prime Added 4 caps flourish excel Drip acclimatized 8 zebra loaches Drip acclimatized 8 panda garra Drip acclimatized 10 amano shrimp 6 zebra nerite snails. Feb 10/16 Drip acclimatized 2 goby Drip acclimatized 2 mini Mexican crayfish All algae is gone other then sand 2 zebra loaches died getting stuck in the high flow power head. Turned off 1 loach died on introduction Feb 12/16 Drip acclimatized 4 kubotai loaches Drip acclimatized 4 bengal loaches Feb 13/16 Drip acclimatized 3 bamboo shrimp from Big Al’s Have been adding a cap of Flourish when I’m down there. As well as a cap of trace every 4 days or so. Currently Tank is diatom and algae free, i didn’t need to clean the class after the Nerite snails we introduced. For feeding: Spirulina flake, specturm sinking algae wafers, spectrum small and medium size pellets, frozen daphnia, frozen mysis, frozen plankton, frozen combo cube and fruit flies when the cultures are large. Feb 15/16 Added a Aponogeton boivinianus, Feb 16/16 Did 25% water change with 1 cap of prime Continue to add 1 cap of Flourish excel, and flourish trace every couple days. Feb 17/16 Planted unnamed plant from Aquarium central. Long single stems with single leaves, grow quite tall. They described it as a weed. Pulled it all out, didn’t look right. Drip acclimatized 4 male congo tetras from Arnold. Feb 21/16 Added another smaller Aponogeton boivinanus and an anubias. I feel like the planting is done and time to leave and wait for grow out. The marsilea has grown a new leaf so they are alive. Many of the original leaves have dies. I left the lights on for more then 24 hours straight and have a slight bit of green algae on the glass and rocks, but very minor. Feb 23/16 30% water change with 1 cap of prime March 1/16 40% water change with 1 cap of prime Aponogeton grows extremely fast March 4/16 Drip acclimatized 2 Whiptail Catfish Drip acclimatized 3 Otocinclus Drip acclimatized 20 snails: Ramshorn, brown nerite, sun snails, turtle snails March 6/16 Drip acclimatized 2 female goby Drip acclimatized 1 Whiptail Catfish Drip acclimatized 2 sun snails and 15 malaysian trumpet snails Noticed small amount of staghorn algae growing on the aponogeton close to the highest light area in the tank, and good flow area. Continue to dose Flourish excel 1 cap per day. May increase dose to 2 caps. Which is indicated and may slow the staghorn. Quote Link to comment Share on other sites More sharing options...
DeepArow Posted March 12, 2016 Report Share Posted March 12, 2016 Where did you get the driftwood? I have been struggling to find anything remotely that size Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.