sherlock

I have had this with mine as well and usually it is one of two things, 1) remove the quick disconnect from the lid and check the intake port on the filter, if there is something caught up in there like some leaves or dead fish it will cause a vortex or swirling motion as the water enters the filter producing noise and air bubbles. Sounds corny but its happened to me, once I removed the debris from the intake port everything was good. 2) you may have an air pocket at the top of the filter. When I fill my canister up I release one of the clamps till the water just starts to come out the top, then I quickly lock it back up, that way you are 100% sure the canister is totally full of water. Another thing to check is the cap that screws on the top of the intake tube, if it is not completely tight it will suck air and cause alot of noise and bubbles.

Where can you find them around Edmonton, I could use a few myself.

Zebra snails are nice and do a great job cleaning the tank but they lay eggs all over everything and are a real pain to clean off. After awhile it becomes very unsightly. :tongue:

Here is something that I came across in my research for treating a tank without using meds, apparently it works wonders for clearing up algae. Hydrogen Peroxide :boxed: http://www.aquarticles.com/articles/plants/Podio_Algae_Hydrogen_Peroxide.html There are alot of sites and forums talking about using this method, so if you have time to do the research it may be something to consider.

I don't think there was a bio-filter to kill, it was a bare bottom tank set up the nite before I moved him in with only a bit of floss in the filter. Maybe I should have done a water change between doses??

I had a geophagus red head tapajos with a white cottony growth growing on his side. I put him into a 10 gallon hospital tank and started treating with maracyn and maracyn II as was suggested in various forums. He was doing well other than the growth when he went into the tank, but this morning after two days of treatment he was dead :cuss: I am not sure what happened, yesterday the growth looked to be going down and then he took a turn for the worse when I added the second dose of meds. I am sure the meds killed him. Did I maybe over-medicate with the combo or was I supposed to only give half the dosage when using two meds??

I have a group of 6 juvies, so I am still waiting for them to color up. Great fish!!

I have had mine for a year and it still won't stay down, I am kicking myself for not drilling holes in the bottom side of it :cuss:

On my 180 I have 2-xp3's and 2-ac 110's. I am looking for some input on different ways of setting up the media.

I got one from him as well and he is coloring up quite nicely, looking very promising when he gets bigger :thumbs:

Would there not be a conflict with rams/apistos with the geo's, seeing how they are all lower tank fish? So far I have; 5 -Geo orange heads 6 -congo tetras 6 -roseline sharks 6 -philipine blue angels (coming from fairdeal) 3 -syno multi's Still looking for more ideas or should I leave this alone now?

I also had this problem even with a clean foam. As goofy as it sounds, you have to push the foam all the way down in the cage until the four "locking" tabs are positioned on the top of the foam. They will not hold the foam down if you don't do this. I also put a rock on top of the media to help. Even doing this, when that foam gets clogged, it is coming up.

Has anyone tried these heaters, are they reliable as compared to the marineland heaters? I am thinking of getting a couple 300W for my 180 gallon, is that enough for that size of tank?