jakdrob Posted January 25, 2010 Report Share Posted January 25, 2010 hey, i dunno how it happened but the rear pane on my 72'' x 26'' H x 18'' cracked and i have to replace it, i can get a 10mm pane for free, question is.... Will this be ok if braced well? The tank has 1/2'' glass everywhere else, which is recomended. the other option i am thinking about is laminating another piece to it.. I don't wanna spend 400 bux on a piece of glass when i paid half that for the whole tank.. Help please Quote Link to comment Share on other sites More sharing options...
Wingin' It Posted January 25, 2010 Report Share Posted January 25, 2010 have you gone to a glass company to ask for their scraps? More often than not, when they're cutting for windows, they cut from HUGE pieces, and then simply throw them away in a bin! I would personally go with whatever the rest of the tank is made of... here's a site that I found that might answer your questing though... http://saltaquarium.about.com/od/planasystem/ig/Guide-Charts--Tables--Diagrams/Glass-Thickness-Calculator.htm Quote Link to comment Share on other sites More sharing options...
fish4fun Posted January 26, 2010 Report Share Posted January 26, 2010 you wanna go at least 12mm or 5/8th inch or the you get a bow and eventually it'll blow out. I work for a tank maker and can quote you on a piece of glass if your interested. PM me.... Cheers, Quote Link to comment Share on other sites More sharing options...
XodoK Posted January 26, 2010 Report Share Posted January 26, 2010 IMO time is worth more than money and the tank. It'll be cheaper overall to scrap the tank and go to Big Al's and buy a new one. Quote Link to comment Share on other sites More sharing options...
fish4fun Posted January 26, 2010 Report Share Posted January 26, 2010 replacing a 26 inch tall tank is not a cheap endeavor. MUCH cheaper to have the pane replaced. Bring the tank to Calgary and I can have it repaired for you for a good price. Quote Link to comment Share on other sites More sharing options...
jakdrob Posted January 26, 2010 Author Report Share Posted January 26, 2010 replacing a 26 inch tall tank is not a cheap endeavor. MUCH cheaper to have the pane replaced. Bring the tank to Calgary and I can have it repaired for you for a good price. Whats a good price? I already removed the cracked piece, i don't wanna move it too much now Quote Link to comment Share on other sites More sharing options...
jakdrob Posted January 26, 2010 Author Report Share Posted January 26, 2010 replacing a 26 inch tall tank is not a cheap endeavor. MUCH cheaper to have the pane replaced. Bring the tank to Calgary and I can have it repaired for you for a good price. Whats a good price? I already removed the cracked piece, i don't wanna move it too much now Just an idea- I should be able to brace across the length of the back pane right in the middle and at the top,,, this will reduce the height of 'unsupported' glass. The 10 mm is free, and that price sounds good to me Quote Link to comment Share on other sites More sharing options...
jakdrob Posted January 27, 2010 Author Report Share Posted January 27, 2010 so my plan- i am going to use the 10mm glass 26''x 72'' , I will euro brace it along the top with 3'' strips and use 2 3'' glass strips from front to back placed at the top evenly placed, standard brace. That should be plenty strong right?? Weigh in please Quote Link to comment Share on other sites More sharing options...
fish4fun Posted January 27, 2010 Report Share Posted January 27, 2010 I'd have to say no. The glass simply is not think enough to stand up to the pressure and weight of the water. In the end, its your call...but be prepared in case your tank blows out. my two cents worth from working for a tank building company. Quote Link to comment Share on other sites More sharing options...
jvision Posted January 27, 2010 Report Share Posted January 27, 2010 Search the DIY forum on MonsterFishKeepers.com - there was a thread on what to do with a broken tank. Make a BIG TANK!!! Check it out HERE. Quote Link to comment Share on other sites More sharing options...
darkangel Posted January 28, 2010 Report Share Posted January 28, 2010 so my plan- i am going to use the 10mm glass 26''x 72'' , I will euro brace it along the top with 3'' strips and use 2 3'' glass strips from front to back placed at the top evenly placed, standard brace. That should be plenty strong right?? Weigh in please 10mm glass is too thin for a 26 x 72 tank, if you use it you are just asking to have a blowout and it won't take long to happen. Save your house and your fish, spend the money. Quote Link to comment Share on other sites More sharing options...
loki Posted February 7, 2010 Report Share Posted February 7, 2010 i have to agree, do not use it. it will be too thin and break. i work for a glass company and you would be amazed at what could cause a break under pressure. think about your house and your fish. and the possibility of water flooding your house then causing a fire....sell it for a reptile tank and buy a new one. Quote Link to comment Share on other sites More sharing options...
jakdrob Posted February 8, 2010 Author Report Share Posted February 8, 2010 i have to agree, do not use it. it will be too thin and break. i work for a glass company and you would be amazed at what could cause a break under pressure. think about your house and your fish. and the possibility of water flooding your house then causing a fire....sell it for a reptile tank and buy a new one. Already bought a new tank, planning on sellimg the other for a terarium,, what can that fetch? Quote Link to comment Share on other sites More sharing options...
Neesmo Posted February 23, 2010 Report Share Posted February 23, 2010 What ended up happening with your tank? What did you end up buying? Kyle Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.